FLUE GAS & MERCURY REMOVAL

Hazardous Waste Incinerators

Jacobi EcoSorb™ and AddSorb™ series in powdered, granular and extruded form are the best solution to treat these kinds of flue gas streams.

Jacobi offers products from both the AddSorb™ and EcoSorb™ series of powdered activated carbons for direct injection to flue gas streams. Typical powdered activated carbon dosage ranges from 50-200 mg/Nm3. The highly variable stream composition presents a treatment challenge in this application.

Conversely, AddSorb™ VQ series extruded and granular carbons can be utilised in fixed or moving bed operations. Providing extremely high adsorption capacity for mercury (Hg) these versatile products can remove up to 70% of their own weight in mercury vapour.

HAZARDOUS WASTE INCINERATORS: PRODUCTS

AddSorb™

AddSorb™

Addsorb™ VQ Extruded and GAC series for the use in fixed bed filters provides different grades for the removal of mercury from flue gas. 

Addsorb™ VQN PAC – powdered carbon for dry injection into the flue gas. It immobilises oxidized and metallic mercury as mercuric sulfide (HgS).  This mercury salt is extremely stable, non-hazardous and insoluble, preventing it from being reemitted to the atmosphere and providing safe, economic disposal as a solid waste.

EcoSorb™

EcoSorb™

EcoSorb™ BP, CB, SP and XP PAC series.

Activated carbons designed for a diverse range of air and gas purification duties. Featuring both powdered types; these products exhibit the high microporosity necessary to adsorb efficiently in the gaseous phase. Moreover, the EcoSorb BP, XP and CB-series use a novel method to increase the mesoporosity of the product to improve gas diffusion into the pore structure, especially important where gas to sorbent contact time is limited.

GET IN TOUCH

Fill out the short form below and or team will be in touch.

  • This field is for validation purposes and should be left unchanged.